Seagate ST3390N Instalační příručka stáhnout pdf (Strana 401)

100

101

Terminal configuration A-19

Configuring an HP700/22 terminal

Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Configuring an HP700/22 terminal

Configuring an

HP700/22 terminal

To configure an HP700/22 terminal, follow these steps.

Step Action

1 Power on the terminal.

2 Enter setup mode by pressing the SETUP key located on the

top row of function keys. If no key is marked SETUP, press the

third key from the left on the top row.

The General setup screen is displayed with the current setup

values.

Note:

There may be minor differences between what you see in

this chapter and the contents of the setup screens on your

terminal. This is because of improvements made to the terminal

by the manufacturer. Follow the setup documented here as

closely as possible.

3 Change the values in each parameter field on each setup

screen as necessary, so that they match those shown in

“HP700/22 setup screens” on page A-20.

Use the following keys to view and change setup values:

Arrow keys Move from field to field.

Return Scroll through possible values or

cause the requested action to take

place (depends on type of field).

4 To save changes, return to the General Setup screen, move the

cursor to the Save field, and press Return.

5 To exit setup mode, press the SETUP key.

1 2 ... 396 397 398 399 400 401 402 403 404 405 406 ... 467 468

Komentáře k této Příručce

Žádné komentáře

Seagate ST3390N Instalační příručka Strana 401

Komentáře k této Příručce

Související produkty a manuály pro Sítě Seagate ST3390N