Seagate ST3390N Instalační příručka

Procházejte online nebo si stáhněte Instalační příručka pro Sítě Seagate ST3390N. Seagate ST3390N Installation guide [en] Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 468
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků

Shrnutí obsahu

Strany 1 - 555-7061-250

Meridian Mail Modular Option ECInstallation and Maintenance GuideProduct release 13 Standard 1.0 November 1999 555-7061-250

Strany 2 - P0904489

viii ContentsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199912 Configuring the Meridian 1 12-1Overview . . . . . . . .

Strany 3

8-12 Configuring the backplane and inspecting the printed circuit packs Removing, checking, and installing PCPsStandard 1.0 Modular Option EC Installa

Strany 4

Configuring the backplane and inspecting the printed circuit packs 8-13Location of Enhanced MMP40 cardsStandard 1.0 Modular Option EC Installation an

Strany 5 - Publication history

8-14 Configuring the backplane and inspecting the printed circuit packs Location of Enhanced MMP40 cardsStandard 1.0 Modular Option EC Installation an

Strany 6 - November 1999

Configuring the backplane and inspecting the printed circuit packs 8-15Location of utility cardsStandard 1.0 Modular Option EC Installation and Maint

Strany 7 - Contents

8-16 Configuring the backplane and inspecting the printed circuit packs Location of VP cardsStandard 1.0 Modular Option EC Installation and Maintenanc

Strany 8 - Installing power supplies 6-1

Configuring the backplane and inspecting the printed circuit packs 8-17Location of VP cardsStandard 1.0 Modular Option EC Installation and Maintenanc

Strany 9 - Contents vii

8-18 Configuring the backplane and inspecting the printed circuit packs Location of VP cardsStandard 1.0 Modular Option EC Installation and Maintenanc

Strany 10 - 14 Adding a node 14-1

Chapter 9Installing intramodule and intermodule cablingIn this chapter Overview 9-2Extraction tool 9-4Installing cables from backplane to I/O panel 9-

Strany 11 - EC system to Release 13 15-1

9-2 Installing intramodule and intermodule cabling OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntr

Strany 12 - B Modem configurations B-1

Installing intramodule and intermodule cabling 9-3OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999• “Installi

Strany 13 - Index Index-1

Contents ixStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Shadowed multi-node expansion. . . . . . . . . . . . . . . .

Strany 14

9-4 Installing intramodule and intermodule cabling Extraction toolStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Extra

Strany 15 - About this guide

Installing intramodule and intermodule cabling 9-5Extraction toolStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Step

Strany 16

9-6 Installing intramodule and intermodule cabling Extraction toolStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Summa

Strany 17 - • cable harnesses

Installing intramodule and intermodule cabling 9-7Extraction toolStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Back

Strany 18

9-8 Installing intramodule and intermodule cabling Installing cables from backplane to I/O panelStandard 1.0 Modular Option EC Installation and Mainte

Strany 19 - Mail Modular Option EC

Installing intramodule and intermodule cabling 9-9Installing RS-232 cablesStandard 1.0 Modular Option EC Installation and Maintenance Guide November

Strany 20

9-10 Installing intramodule and intermodule cabling Installing RS-232 cablesStandard 1.0 Modular Option EC Installation and Maintenance Guide November

Strany 21 - Node expansion on an

Installing intramodule and intermodule cabling 9-11Intermodule bus cable connectionStandard 1.0 Modular Option EC Installation and Maintenance Guide

Strany 22

9-12 Installing intramodule and intermodule cabling Intermodule bus cable connectionStandard 1.0 Modular Option EC Installation and Maintenance Guide

Strany 23

Installing intramodule and intermodule cabling 9-13Intermodule bus cable connectionStandard 1.0 Modular Option EC Installation and Maintenance Guide

Strany 24

x ContentsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199918 Hardware maintenance 18-1Overview . . . . . . . . . . . .

Strany 25 - Switch requirements

9-14 Installing intramodule and intermodule cabling Intermodule bus cable connectionStandard 1.0 Modular Option EC Installation and Maintenance Guide

Strany 26

Installing intramodule and intermodule cabling 9-15Intermodule bus cable connectionStandard 1.0 Modular Option EC Installation and Maintenance Guide

Strany 27 - Preparing for installation

9-16 Installing intramodule and intermodule cabling Intermodule bus cable connectionStandard 1.0 Modular Option EC Installation and Maintenance Guide

Strany 28

Chapter 10Installing, cabling, and configuring peripheral devicesIn this chapter Overview 10-2Installation overview 10-3Installing the primary adminis

Strany 29 - Tools required

10-2 Installing, cabling, and configuring peripheral devices OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Ov

Strany 30

Installing, cabling, and configuring peripheral devices 10-3Installation overviewStandard 1.0 Modular Option EC Installation and Maintenance Guide N

Strany 31 - Assembly overview

10-4 Installing, cabling, and configuring peripheral devices Installation overviewStandard 1.0 Modular Option EC Installation and Maintenance Guide No

Strany 32

Installing, cabling, and configuring peripheral devices 10-5Installation overviewStandard 1.0 Modular Option EC Installation and Maintenance Guide N

Strany 33 - Installation tasks

10-6 Installing, cabling, and configuring peripheral devices Installing the primary administration terminal and multiple user administration terminals

Strany 34 - 3-4 Assembly overview

Installing, cabling, and configuring peripheral devices 10-7Installing the primary administration terminal and multiple user administration terminals

Strany 35 - Unpacking and inspecting

Contents xiStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999C Enhanced MMP40 (or MMP40) troubleshooting flowcharts C-1Ov

Strany 36

10-8 Installing, cabling, and configuring peripheral devices Installing the primary administration terminal and multiple user administration terminals

Strany 37

Installing, cabling, and configuring peripheral devices 10-9Installing and configuring the Digital printersStandard 1.0 Modular Option EC Installatio

Strany 38

10-10 Installing, cabling, and configuring peripheral devices Installing and configuring the Digital printersStandard 1.0 Modular Option EC Installati

Strany 39

Installing, cabling, and configuring peripheral devices 10-11Installing and configuring the Digital printersStandard 1.0 Modular Option EC Installati

Strany 40 - PCP removal

10-12 Installing, cabling, and configuring peripheral devices Installing and configuring the Digital printersStandard 1.0 Modular Option EC Installati

Strany 41 - Installing a column or

Installing, cabling, and configuring peripheral devices 10-13Installing and configuring the Digital printersStandard 1.0 Modular Option EC Installati

Strany 42

10-14 Installing, cabling, and configuring peripheral devices LA30N Companion printerStandard 1.0 Modular Option EC Installation and Maintenance Guide

Strany 43 - Installing a module

Installing, cabling, and configuring peripheral devices 10-15LA30N Companion printerStandard 1.0 Modular Option EC Installation and Maintenance Guide

Strany 44 - Module identification

10-16 Installing, cabling, and configuring peripheral devices LA30N Companion printerStandard 1.0 Modular Option EC Installation and Maintenance Guide

Strany 45

Installing, cabling, and configuring peripheral devices 10-17LA30N Companion printerStandard 1.0 Modular Option EC Installation and Maintenance Guide

Strany 46

xii ContentsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 47 - Installing power supplies

10-18 Installing, cabling, and configuring peripheral devices Installing and configuring the HP Thinkjet printerStandard 1.0 Modular Option EC Install

Strany 48

Installing, cabling, and configuring peripheral devices 10-19Installing and configuring the HP Thinkjet printerStandard 1.0 Modular Option EC Install

Strany 49 - Location of power

10-20 Installing, cabling, and configuring peripheral devices Installing and configuring the HP Thinkjet printerStandard 1.0 Modular Option EC Install

Strany 50 - AC system

Installing, cabling, and configuring peripheral devices 10-21Installing and configuring local modemsStandard 1.0 Modular Option EC Installation and M

Strany 51

10-22 Installing, cabling, and configuring peripheral devices Installing and configuring remote modemsStandard 1.0 Modular Option EC Installation and

Strany 52 - DC system

Installing, cabling, and configuring peripheral devices 10-23Installing and configuring remote modemsStandard 1.0 Modular Option EC Installation and

Strany 53

10-24 Installing, cabling, and configuring peripheral devices Installing and configuring the Guest Administration ConsoleStandard 1.0 Modular Option E

Strany 54

Installing, cabling, and configuring peripheral devices 10-25Installing and configuring the Guest Administration ConsoleStandard 1.0 Modular Option E

Strany 55 - Installing the disk drives

10-26 Installing, cabling, and configuring peripheral devices Installing and configuring the Guest Administration ConsoleStandard 1.0 Modular Option E

Strany 56

Installing, cabling, and configuring peripheral devices 10-27Bix block cabling for peripheral devicesStandard 1.0 Modular Option EC Installation and

Strany 57 - Modular Option EC

PrefaceAbout this guideIn this chapter Overview xivAdministration Guide references xvi

Strany 58

10-28 Installing, cabling, and configuring peripheral devices Bix block cabling for peripheral devicesStandard 1.0 Modular Option EC Installation and

Strany 59 - Risk of electrical shock

Installing, cabling, and configuring peripheral devices 10-29Bix block cabling for peripheral devicesStandard 1.0 Modular Option EC Installation and

Strany 60 - Installing disks in an

10-30 Installing, cabling, and configuring peripheral devices Bix block cabling for peripheral devicesStandard 1.0 Modular Option EC Installation and

Strany 61

Installing, cabling, and configuring peripheral devices 10-31Bix block cabling for peripheral devicesStandard 1.0 Modular Option EC Installation and

Strany 62 - Location of disk

10-32 Installing, cabling, and configuring peripheral devices Bix block cabling for peripheral devicesStandard 1.0 Modular Option EC Installation and

Strany 63

Installing, cabling, and configuring peripheral devices 10-33Bix block cabling for peripheral devicesStandard 1.0 Modular Option EC Installation and

Strany 64

10-34 Installing, cabling, and configuring peripheral devices Bix block cabling for peripheral devicesStandard 1.0 Modular Option EC Installation and

Strany 65

Chapter 11Installing the Meridian Mail to PBX interfaceIn this chapter Overview 11-2Establishing the network loop connection between Meridian Mail and

Strany 66 - Installing disks in a

11-2 Installing the Meridian Mail to PBX interface OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntr

Strany 67 - Disk drive diagrams

Installing the Meridian Mail to PBX interface 11-3Establishing the network loop connection between Meridian Mail and the Meridian 1Standard 1.0 Modul

Strany 68

xiv About this guide OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntroductionThis document describe

Strany 69 - DC power connector

11-4 Installing the Meridian Mail to PBX interface Establishing the network loop connection between Meridian Mail and the Meridian 1Standard 1.0 Modul

Strany 70

Installing the Meridian Mail to PBX interface 11-5Installing the network loopStandard 1.0 Modular Option EC Installation and Maintenance Guide Novem

Strany 71

11-6 Installing the Meridian Mail to PBX interface Installing the network loopStandard 1.0 Modular Option EC Installation and Maintenance Guide Novemb

Strany 72

Installing the Meridian Mail to PBX interface 11-7Installing the network loopStandard 1.0 Modular Option EC Installation and Maintenance Guide Novem

Strany 73

11-8 Installing the Meridian Mail to PBX interface Installing the network loopStandard 1.0 Modular Option EC Installation and Maintenance Guide Novemb

Strany 74

Installing the Meridian Mail to PBX interface 11-9Installing the network loopStandard 1.0 Modular Option EC Installation and Maintenance Guide Novem

Strany 75

11-10 Installing the Meridian Mail to PBX interface Installing the network loopStandard 1.0 Modular Option EC Installation and Maintenance Guide Novem

Strany 76 - J1 SCSI I/O connector

Installing the Meridian Mail to PBX interface 11-11Establishing the AML connection between Meridian Mail and the Meridian 1Standard 1.0 Modular Optio

Strany 77

11-12 Installing the Meridian Mail to PBX interface Establishing the AML connection between Meridian Mail and the Meridian 1Standard 1.0 Modular Optio

Strany 78 - (See photo on next page.)

Installing the Meridian Mail to PBX interface 11-13Establishing the AML connection between Meridian Mail and the Meridian 1Standard 1.0 Modular Optio

Strany 79

About this guide xvOverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999• cartridge tape unitsThis manual does not

Strany 80 - Overview of tape drives

11-14 Installing the Meridian Mail to PBX interface Establishing the AML connection between Meridian Mail and the Meridian 1Standard 1.0 Modular Optio

Strany 81 - Tandberg tape drive

Installing the Meridian Mail to PBX interface 11-15Establishing the AML connection between Meridian Mail and the Meridian 1Standard 1.0 Modular Optio

Strany 82 - Archive tape drive

11-16 Installing the Meridian Mail to PBX interface Establishing the AML connection between Meridian Mail and the Meridian 1Standard 1.0 Modular Optio

Strany 83 - Risk of data errors

Installing the Meridian Mail to PBX interface 11-17Installing the multipurpose serial data link cardStandard 1.0 Modular Option EC Installation and M

Strany 84 - Tape drive location

11-18 Installing the Meridian Mail to PBX interface Installing the multipurpose serial data link cardStandard 1.0 Modular Option EC Installation and M

Strany 85 - Tape drive installation

Installing the Meridian Mail to PBX interface 11-19Installing the multipurpose serial data link cardStandard 1.0 Modular Option EC Installation and M

Strany 86 - Installing the tape

11-20 Installing the Meridian Mail to PBX interface Installing the enhanced serial data interface cardStandard 1.0 Modular Option EC Installation and

Strany 87

Installing the Meridian Mail to PBX interface 11-21Installing the enhanced serial data interface cardStandard 1.0 Modular Option EC Installation and

Strany 88

11-22 Installing the Meridian Mail to PBX interface Installing the enhanced serial data interface cardStandard 1.0 Modular Option EC Installation and

Strany 89 - Chapter 8

Installing the Meridian Mail to PBX interface 11-23Installing the enhanced serial data interface cardStandard 1.0 Modular Option EC Installation and

Strany 90 - • Set the backplane switches

xvi About this guide Administration Guide referencesStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Administration Guid

Strany 91 - Backplane switch settings

11-24 Installing the Meridian Mail to PBX interface Installing the AML cablingStandard 1.0 Modular Option EC Installation and Maintenance Guide Novemb

Strany 92

Installing the Meridian Mail to PBX interface 11-25Installing the AML cablingStandard 1.0 Modular Option EC Installation and Maintenance Guide Novem

Strany 93 - (unshadowed system)

11-26 Installing the Meridian Mail to PBX interface Installing the AML cablingStandard 1.0 Modular Option EC Installation and Maintenance Guide Novemb

Strany 94

Chapter 12Configuring the Meridian 1In this chapterOverview 12-2Getting started 12-3Checking the CPU ROM daughterboard 12-4Replacing the CPU ROM daugh

Strany 95

12-2 Configuring the Meridian 1 OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntroductionThis sectio

Strany 96 - S4 and S5 address

Configuring the Meridian 1 12-3Getting startedStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Getting startedIntroduc

Strany 97 - S7 EVB terminator

12-4 Configuring the Meridian 1 Checking the CPU ROM daughterboardStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Check

Strany 98

Configuring the Meridian 1 12-5Replacing the CPU ROM daughterboardStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Rep

Strany 99 - Removing, checking

12-6 Configuring the Meridian 1 Replacing the CPU ROM daughterboardStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19998 Us

Strany 100 - NT6R15AA S2 OFF ON

Configuring the Meridian 1 12-7Establishing the AML using an ESDI cardStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199

Strany 101 - cards in a

Chapter 1Introduction to Meridian Mail Modular Option ECIn this chapter Overview 1-2Converting from an existing Modular Option EC system 1-3Hardware 1

Strany 102 - 6 MSU4MSU2 78 11

12-8 Configuring the Meridian 1 Establishing the AML using an ESDI cardStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 103 - Location of utility cards

Configuring the Meridian 1 12-9Establishing the AML using an ESDI cardStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199

Strany 104 - Location of VP cards

12-10 Configuring the Meridian 1 Establishing the AML using an ESDI cardStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199

Strany 105 - Enhanced MMP40

Configuring the Meridian 1 12-11Establishing the AML using an ESDI cardStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19

Strany 106

12-12 Configuring the Meridian 1 Establishing the AML using an ESDI cardStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199

Strany 107 - Installing intramodule and

Configuring the Meridian 1 12-13Enabling the ESDI port or activating the AMLStandard 1.0 Modular Option EC Installation and Maintenance Guide Novemb

Strany 108 - Overview

12-14 Configuring the Meridian 1 Enabling the ESDI port or activating the AMLStandard 1.0 Modular Option EC Installation and Maintenance Guide Novembe

Strany 109 - References to

Configuring the Meridian 1 12-15Establishing the AML using an MSDL cardStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19

Strany 110 - Extraction tool

12-16 Configuring the Meridian 1 Establishing the AML using an MSDL cardStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199

Strany 111 - Angle this end

Configuring the Meridian 1 12-17Establishing the AML using an MSDL cardStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19

Strany 112

P0904489

Strany 113

1-2 Introduction to Meridian Mail Modular Option EC OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewInt

Strany 114 - Risk of equipment damage

12-18 Configuring the Meridian 1 Activating the AML (MSDL card, X11 Release 18 or later)Standard 1.0 Modular Option EC Installation and Maintenance Gu

Strany 115 - Installing RS-232 cables

Configuring the Meridian 1 12-19Defining Meridian Mail in the customer data blockStandard 1.0 Modular Option EC Installation and Maintenance Guide N

Strany 116

12-20 Configuring the Meridian 1 Defining Meridian Mail in the customer data blockStandard 1.0 Modular Option EC Installation and Maintenance Guide No

Strany 117 - EVB cabling guide

Configuring the Meridian 1 12-21Defining Meridian Mail in the customer data blockStandard 1.0 Modular Option EC Installation and Maintenance Guide N

Strany 118

12-22 Configuring the Meridian 1 Defining Meridian Mail in the customer data blockStandard 1.0 Modular Option EC Installation and Maintenance Guide No

Strany 119 - External voice bus cabling

Configuring the Meridian 1 12-23Defining Meridian Mail in the customer data blockStandard 1.0 Modular Option EC Installation and Maintenance Guide N

Strany 120 - Installing EVB

12-24 Configuring the Meridian 1 Configuring the trunk route data block (NMS only)Standard 1.0 Modular Option EC Installation and Maintenance Guide No

Strany 121

Configuring the Meridian 1 12-25Defining Meridian Mail primary ACD queuesStandard 1.0 Modular Option EC Installation and Maintenance Guide November

Strany 122 - Installing EVB cables

12-26 Configuring the Meridian 1 Defining Meridian Mail primary ACD queuesStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1

Strany 123 - Installing, cabling, and

Configuring the Meridian 1 12-27Defining Meridian Mail secondary ACD queuesStandard 1.0 Modular Option EC Installation and Maintenance Guide Novembe

Strany 124

Introduction to Meridian Mail Modular Option EC 1-3Converting from an existing Modular Option EC systemStandard 1.0 Modular Option EC Installation an

Strany 125 - Installation overview

12-28 Configuring the Meridian 1 Programming the network loopStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Programmin

Strany 126 - Installing the A/B

Configuring the Meridian 1 12-29Programming the network loopStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Overlay 1

Strany 127 - Meridian Mail

12-30 Configuring the Meridian 1 Programming the network loopStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Verifying

Strany 128 - Installing the primary

Configuring the Meridian 1 12-31Adding ACD agentsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Adding ACD agentsInt

Strany 129 - Installing a MAT

12-32 Configuring the Meridian 1 Adding ACD agentsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Adding ACD agentsTo a

Strany 130 - System Administration Tools

Configuring the Meridian 1 12-33Adding ACD agentsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Overlay 11—ACD agent

Strany 131

12-34 Configuring the Meridian 1 Adding ACD agentsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Example• Agent 1 Key

Strany 132

Configuring the Meridian 1 12-35Setting call routing options for user telephone setsStandard 1.0 Modular Option EC Installation and Maintenance Guide

Strany 133 - LA75 Plus Companion and LA30

12-36 Configuring the Meridian 1 Setting call routing options for user telephone setsStandard 1.0 Modular Option EC Installation and Maintenance Guide

Strany 134 - Plus Companion

Configuring the Meridian 1 12-37Setting call routing options for user telephone setsStandard 1.0 Modular Option EC Installation and Maintenance Guide

Strany 135 - LA75 printer default settings

1-4 Introduction to Meridian Mail Modular Option EC Converting from an existing Modular Option EC systemStandard 1.0 Modular Option EC Installation an

Strany 136 - Companion printer

12-38 Configuring the Meridian 1 Saving Meridian 1 changesStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Saving Meridi

Strany 137 - LA30N Companion printer

Chapter 13Starting up and configuring Meridian MailIn this chapterOverview 13-2Starting up Meridian Mail 13-3Configuring Meridian Mail 13-8

Strany 138 - printer default

13-2 Starting up and configuring Meridian Mail OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntroduc

Strany 139

Starting up and configuring Meridian Mail 13-3Starting up Meridian MailStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19

Strany 140 - Thinkjet printer

13-4 Starting up and configuring Meridian Mail Starting up Meridian MailStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199

Strany 141 - ThinkJet

Starting up and configuring Meridian Mail 13-5Starting up Meridian MailStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19

Strany 142

13-6 Starting up and configuring Meridian Mail Starting up Meridian MailStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199

Strany 143 - “Modem configurations.”

Starting up and configuring Meridian Mail 13-7Starting up Meridian MailStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19

Strany 144 - Installing the remote

13-8 Starting up and configuring Meridian Mail Configuring Meridian MailStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199

Strany 145

Starting up and configuring Meridian Mail 13-9Configuring Meridian MailStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19

Strany 146 - Installing a GAC

Introduction to Meridian Mail Modular Option EC 1-5HardwareStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999HardwareIn

Strany 147 - Meridian

13-10 Starting up and configuring Meridian Mail Configuring Meridian MailStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19

Strany 148 - Installing a networking

Chapter 14Adding a nodeIn this chapterOverview 14-2Getting started 14-3Expanding unshadowed systems 14-5One- to two-node expansion (unshadowed) 14-6Tw

Strany 149

14-2 Adding a node OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntroductionYou can provide addition

Strany 150

Adding a node 14-3Getting startedStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Getting startedIntroductionBefore yo

Strany 151

14-4 Adding a node Getting startedStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Note 3: Fill up the voice card slots:

Strany 152 - I/O cable

Adding a node 14-5Expanding unshadowed systemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Expanding unshadowed sy

Strany 153

14-6 Adding a node One- to two-node expansion (unshadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999One- to two-n

Strany 154

Adding a node 14-7One- to two-node expansion (unshadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 19994 If you are

Strany 155

14-8 Adding a node One- to two-node expansion (unshadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 19997 Configure t

Strany 156

Adding a node 14-9Two- to three-node expansion (unshadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Two- to th

Strany 157 - Mail to PBX interface

1-6 Introduction to Meridian Mail Modular Option EC HardwareStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999the module.

Strany 158

14-10 Adding a node Two- to three-node expansion (unshadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 19993 Remove a

Strany 159 - Mail and the Meridian 1

Adding a node 14-11Two- to three-node expansion (unshadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 19997 Refer t

Strany 160

14-12 Adding a node Three- to four-node expansion (unshadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Three- to

Strany 161 - Installing the network loop

Adding a node 14-13Three- to four-node expansion (unshadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Adding n

Strany 162

14-14 Adding a node Three- to four-node expansion (unshadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Intermodu

Strany 163 - Installing the network

Adding a node 14-15Three- to four-node expansion (unshadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 19999 Remove

Strany 164 - Using direct cabling

14-16 Adding a node Four- to five-node expansion (unshadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Four- to f

Strany 165 - Using indirect cabling

Adding a node 14-17Four- to five-node expansion (unshadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 19995 If you

Strany 166 - System Administration Guide

14-18 Adding a node Four- to five-node expansion (unshadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 19997 Perform

Strany 167 - Software

Adding a node 14-19Unshadowed multi-node expansionStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Unshadowed multi-no

Strany 168

Introduction to Meridian Mail Modular Option EC 1-7Switch requirementsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199

Strany 169

14-20 Adding a node Expanding shadowed systemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Expanding shadowed system

Strany 170

Adding a node 14-21One- to two-node expansion (shadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999One- to two-n

Strany 171 - See Notes on the next page–

14-22 Adding a node One- to two-node expansion (shadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 19994 If you plan

Strany 172

Adding a node 14-23Two- to three-node expansion (shadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Two- to thr

Strany 173 - Installing the MSDL

14-24 Adding a node Two- to three-node expansion (shadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 19996 Verify tha

Strany 174

Adding a node 14-25Two- to three-node expansion (shadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 19998 If you pl

Strany 175 - Tens Ones

14-26 Adding a node Two- to three-node expansion (shadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999e. If node 1

Strany 176 - (QPC513H or later)

Adding a node 14-27Three- to four-node expansion (shadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Three- to

Strany 177 - Installing the ESDI

14-28 Adding a node Three- to four-node expansion (shadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 19994 If you pl

Strany 178 - Step Action

Adding a node 14-29Three- to four-node expansion (shadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999f. After t

Strany 179 - Circuit Card Installation

1-8 Introduction to Meridian Mail Modular Option EC Switch requirementsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 180 - Installing the AML cabling

14-30 Adding a node Four- to five-node expansion (shadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Four- to fiv

Strany 181

Adding a node 14-31Four- to five-node expansion (shadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 19997 If you ar

Strany 182

14-32 Adding a node Four- to five-node expansion (shadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 19999 Install th

Strany 183 - Meridian 1

Adding a node 14-33Four- to five-node expansion (shadowed)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 199912 Perform

Strany 184

14-34 Adding a node Shadowed multi-node expansionStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Shadowed multi-node ex

Strany 185 - Getting started

Chapter 15Converting from an existing Modular Option EC system to Release 13In this chapterOverview 15-2Before beginning system installation 15-3Hardw

Strany 186 - ROM selection

15-2 Converting from an existing Modular Option EC system to Release 13 OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide Nove

Strany 187 - Dual-CPU Meridian 1

Converting from an existing Modular Option EC system to Release 13 15-3Before beginning system installationStandard 1.0 Modular Option EC Installatio

Strany 188

15-4 Converting from an existing Modular Option EC system to Release 13 Hardware requirementsStandard 1.0 Modular Option EC Installation and Maintenan

Strany 189 - Configuring the ESDI

Converting from an existing Modular Option EC system to Release 13 15-5Hardware requirementsStandard 1.0 Modular Option EC Installation and Maintenan

Strany 190

Chapter 2Preparing for installationIn this chapter Overview 2-2Tools required 2-3Reference documents 2-4

Strany 191

15-6 Converting from an existing Modular Option EC system to Release 13 Hardware requirementsStandard 1.0 Modular Option EC Installation and Maintenan

Strany 192

Converting from an existing Modular Option EC system to Release 13 15-7Hardware requirementsStandard 1.0 Modular Option EC Installation and Maintenan

Strany 193

15-8 Converting from an existing Modular Option EC system to Release 13 Hardware requirementsStandard 1.0 Modular Option EC Installation and Maintenan

Strany 194

Chapter 16Troubleshooting startup problemsIn this chapterOverview 16-2Normal startup sequence 16-4Normal bootup sequence 16-7Bootup problems 16-13Trou

Strany 195 - (ESDI, X11 Release 17

16-2 Troubleshooting startup problems OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntroductionWhen

Strany 196 - Status messages

Troubleshooting startup problems 16-3OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999In a DC system, switch o

Strany 197 - Defining the MSDL

16-4 Troubleshooting startup problems Normal startup sequenceStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Normal sta

Strany 198

Troubleshooting startup problems 16-5Normal startup sequenceStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Hexadecim

Strany 199

16-6 Troubleshooting startup problems Normal startup sequenceStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Typical st

Strany 200

Troubleshooting startup problems 16-7Normal bootup sequenceStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Normal boo

Strany 201 - Overlay 15 prompts

2-2 Preparing for installation OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntroductionEnsure that

Strany 202

16-8 Troubleshooting startup problems Normal bootup sequenceStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Bootup stag

Strany 203 - Quick Reference Guide

Troubleshooting startup problems 16-9Normal bootup sequenceStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19995 Meridian

Strany 204

16-10 Troubleshooting startup problems Normal bootup sequenceStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999When the b

Strany 205 - Features and Options

Troubleshooting startup problems 16-11Normal bootup sequenceStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999• Link st

Strany 206 - Configuring the route

16-12 Troubleshooting startup problems Normal bootup sequenceStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999DSP Port S

Strany 207 - Meridian Mail ACD

Troubleshooting startup problems 16-13Bootup problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Bootup problemsS

Strany 208

16-14 Troubleshooting startup problems Bootup problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Only one node com

Strany 209 - Services ACD queues

Troubleshooting startup problems 16-15Troubleshooting terminal problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19

Strany 210 - Programming the network loop

16-16 Troubleshooting startup problems Troubleshooting terminal problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199

Strany 211

Troubleshooting startup problems 16-17Troubleshooting terminal problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19

Strany 212 - Verifying the network

Preparing for installation 2-3Tools requiredStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Tools requiredIntroductio

Strany 213 - Adding ACD agents

16-18 Troubleshooting startup problems Power problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Power problemsPrel

Strany 214

Troubleshooting startup problems 16-19Power problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Testing the pedes

Strany 215 - Overlay 11—ACD agents

16-20 Troubleshooting startup problems Power problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999DC pedestal, NT6D5

Strany 216

Troubleshooting startup problems 16-21Power problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Front view of mod

Strany 217 - Call routing options

16-22 Troubleshooting startup problems Power problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Resolving AC syste

Strany 218 - (NTP 553-2301-105)

Troubleshooting startup problems 16-23Power problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Front view of mod

Strany 219

16-24 Troubleshooting startup problems System fails to boot completelyStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999S

Strany 220 - Saving Meridian 1 changes

Troubleshooting startup problems 16-25System fails to boot completelyStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 221 - Starting up and

16-26 Troubleshooting startup problems System fails to boot completelyStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999I

Strany 222

Troubleshooting startup problems 16-27System fails to boot completelyStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 223 - Starting up Meridian Mail

Meridian Mail Modular Option ECInstallation and Maintenance GuidePublication number: 555-7061-250Product release: 13Document release: Standard 1.0Dat

Strany 224

2-4 Preparing for installation Reference documentsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Reference documentsIn

Strany 225 - Reset button

16-28 Troubleshooting startup problems System fails to boot completelyStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999T

Strany 226 - Modification Guide

Troubleshooting startup problems 16-29System fails to boot completelyStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 227 - Administration Guide

16-30 Troubleshooting startup problems Disk subsystem checkStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Disk subsyst

Strany 228 - Configuring Meridian Mail

Troubleshooting startup problems 16-31System bus diagnosticsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999System bu

Strany 229 - System

16-32 Troubleshooting startup problems Hardware diagnosticsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Hardware dia

Strany 230 - Acceptance testing

Troubleshooting startup problems 16-33Utility card diagnosticsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Utility

Strany 231 - Adding a node

16-34 Troubleshooting startup problems Voice processor card diagnosticsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 232

Troubleshooting startup problems 16-35SCSI subsystem problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999SCSI sub

Strany 233

16-36 Troubleshooting startup problems SCSI subsystem problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 234 - Powering up or down

Chapter 17Troubleshooting operational problemsIn this chapterOverview 17-2System-level problems 17-4AML problems 17-7AML troubleshooting procedures 17

Strany 235 - Expanding unshadowed systems

Chapter 3Assembly overviewIn this chapter Overview 3-2Installation tasks 3-3

Strany 236 - Expanding from a 1- to

17-2 Troubleshooting operational problems OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntroductionT

Strany 237

Troubleshooting operational problems 17-3OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999System backups (disk

Strany 238

17-4 Troubleshooting operational problems System-level problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999System-l

Strany 239 - Expanding from a 2- to

Troubleshooting operational problems 17-5System-level problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19993 Court

Strany 240

17-6 Troubleshooting operational problems System-level problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Meridian

Strany 241

Troubleshooting operational problems 17-7AML problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999AML problemsIntr

Strany 242 - Expanding from a 3- to

17-8 Troubleshooting operational problems AML problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999• If AML cabling

Strany 243

Troubleshooting operational problems 17-9AML problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999• Meridian 1 har

Strany 244

17-10 Troubleshooting operational problems AML problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999SLFT ESDI n use:

Strany 245

Troubleshooting operational problems 17-11AML problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999codes (includin

Strany 246 - Expanding from a 4- to

3-2 Assembly overview OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntroductionThis chapter summariz

Strany 247

17-12 Troubleshooting operational problems AML problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999CSA error messag

Strany 248

Troubleshooting operational problems 17-13AML problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Status and diag

Strany 249 - EC by several nodes at once

17-14 Troubleshooting operational problems AML problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Note: The ESDI/M

Strany 250 - Expanding shadowed systems

Troubleshooting operational problems 17-15AML problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999DSC ESDI nRLS A

Strany 251 - See the illustration below

17-16 Troubleshooting operational problems AML problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999STAT CMS nSTAT A

Strany 252

Troubleshooting operational problems 17-17AML troubleshooting proceduresStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1

Strany 253 - 2-node to a 3-node

17-18 Troubleshooting operational problems AML troubleshooting proceduresStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19

Strany 254

Troubleshooting operational problems 17-19Voice card/channel problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 255 - Terminator

17-20 Troubleshooting operational problems Voice card/channel problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999C

Strany 256

Troubleshooting operational problems 17-21Voice card/channel problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 257 - 3-node to a 4-node

Assembly overview 3-3Installation tasksStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Installation tasksInstall task

Strany 258

17-22 Troubleshooting operational problems Silent channelsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Silent channe

Strany 259

Troubleshooting operational problems 17-23Silent channelsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Silent chann

Strany 260 - 4-node to a 5-node

17-24 Troubleshooting operational problems Administration problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Admin

Strany 261

Troubleshooting operational problems 17-25Administration problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Opti

Strany 262

17-26 Troubleshooting operational problems Administration problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Syste

Strany 263

Troubleshooting operational problems 17-27User-reported problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999User-

Strany 264 - Shadowed multi-node expansion

17-28 Troubleshooting operational problems User-reported problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Messag

Strany 265 - EC system to Release 13

Troubleshooting operational problems 17-29User-reported problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Rever

Strany 266

17-30 Troubleshooting operational problems User-reported problemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19996 Veri

Strany 267 - Hardware conversion

Chapter 18Hardware maintenanceIn this chapterOverview 18-2Power supply replacement 18-3Printed circuit packs (PCPs) 18-5Slot allocations for unshadowe

Strany 268 - Hardware requirements

3-4 Assembly overview Installation tasksStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 269 - Replacing the 68K

18-2 Hardware maintenance OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntroductionThis section prov

Strany 270 - Installing a 9600 bps

Hardware maintenance 18-3Power supply replacementStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Power supply replace

Strany 271

18-4 Hardware maintenance Power supply replacementStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Power division point

Strany 272

Hardware maintenance 18-5Printed circuit packs (PCPs)Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Printed circuit

Strany 273 - Chapter 16

18-6 Hardware maintenance Slot allocations for unshadowed configurationsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199

Strany 274

Hardware maintenance 18-7Slot allocations for unshadowed configurationsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19

Strany 275 - Reference documents

18-8 Hardware maintenance Slot allocations for unshadowed configurationsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199

Strany 276 - Normal startup sequence

Hardware maintenance 18-9Slot allocations for unshadowed configurationsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19

Strany 277

18-10 Hardware maintenance Slot allocations for unshadowed configurationsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19

Strany 278 - Behavior of LED indicators

Hardware maintenance 18-11Slot allocations for shadowed configurationsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199

Strany 279 - Normal bootup sequence

Chapter 4Unpacking and inspecting the equipmentIn this chapter Overview 4-2Unpacking and inspecting 4-3Removing and reinstalling printed circuit packs

Strany 280

18-12 Hardware maintenance Slot allocations for shadowed configurationsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 281

Hardware maintenance 18-13Slot allocations for shadowed configurationsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199

Strany 282 - System status

18-14 Hardware maintenance Slot allocations for shadowed configurationsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 283

Hardware maintenance 18-15Slot allocations for shadowed configurationsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199

Strany 284 - DSP Port Status screen

18-16 Hardware maintenance Slot allocations for shadowed configurationsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 285 - Bootup problems

Hardware maintenance 18-17Slot allocations for shadowed configurationsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 199

Strany 286

18-18 Hardware maintenance Disk unit replacementStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Disk unit replacement I

Strany 287 - Correcting a blank

Hardware maintenance 18-19Disk unit replacement—unshadowed systemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Disk

Strany 288 - Determining a problem

18-20 Hardware maintenance Disk unit replacement—unshadowed systemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19999 Is

Strany 289

Hardware maintenance 18-21Disk unit replacement—shadowed systemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Disk u

Strany 290 - Power problems

4-2 Unpacking and inspecting the equipment OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntroduction

Strany 291 - NT7D67CA

18-22 Hardware maintenance Disk unit replacement—shadowed systemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999illustr

Strany 292 - TB1 in pedestal

Hardware maintenance 18-23Disk unit replacement—shadowed systemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Replac

Strany 293 - Testing the DCEPS

18-24 Hardware maintenance Disk unit replacement—shadowed systemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999d. Ensu

Strany 294 - Testing the power

Hardware maintenance 18-25Disk unit replacement—shadowed systemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Upgrad

Strany 295 - 230 V AC

18-26 Hardware maintenance Disk unit replacement—shadowed systemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999At the

Strany 296 - Determine stage of

Hardware maintenance 18-27Enable or disable disk shadowingStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Enable or d

Strany 297 - 1 or 2 bootup failure

18-28 Hardware maintenance Enable or disable disk shadowingStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19993 To select

Strany 298 - 3 bootup failure—disk

Hardware maintenance 18-29Tape drive replacementStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Tape drive replacemen

Strany 299

18-30 Hardware maintenance Tape drive replacementStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Archive tape drive con

Strany 300 - 10 bootup failure

Hardware maintenance 18-31Tape drive replacementStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Tandberg tape drive c

Strany 301 - 11 bootup failure

Unpacking and inspecting the equipment 4-3Unpacking and inspectingStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Unp

Strany 302 - Disk subsystem check

18-32 Hardware maintenance Tape drive maintenanceStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Tape drive maintenance

Strany 303 - System bus diagnostics

Hardware maintenance 18-33Tape drive maintenanceStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999swabs, or any industr

Strany 304 - Hardware diagnostics

18-34 Hardware maintenance Tape drive maintenanceStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Cleaning the Archive t

Strany 305 - Utility card diagnostics

Hardware maintenance 18-35Tape drive maintenanceStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Archive tape drive cl

Strany 306 - VP diagnostics

18-36 Hardware maintenance Tape drive maintenanceStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Cleaning the Tandberg

Strany 307 - SCSI subsystem problems

Hardware maintenance 18-37Tape drive maintenanceStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19997 After a suitable pe

Strany 308

18-38 Hardware maintenance Tape drive maintenanceStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 309 - Troubleshooting

Chapter 19Common disk subsystem problemsIn this chapterOverview 19-2Disk problems identified by SEERs 19-4Data loss and disk replacement 19-6

Strany 310

19-2 Common disk subsystem problems OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntroductionWhen di

Strany 311

Common disk subsystem problems 19-3OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Disk drive sanity testTo c

Strany 312 - System-level problems

4-4 Unpacking and inspecting the equipment Unpacking and inspectingStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19998 Re

Strany 313

19-4 Common disk subsystem problems Disk problems identified by SEERsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Di

Strany 314 - Meridian Mail service

Common disk subsystem problems 19-5Disk problems identified by SEERsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999D

Strany 315 - AML problems

19-6 Common disk subsystem problems Data loss and disk replacementStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Data

Strany 316 - Call and database

Appendix ATerminal configurationIn this appendixOverview A-2Configuring an HP700/32 terminal A-3Configuring a VT420 terminal A-7Configuring a VT520 te

Strany 317 - AML status

A-2 Terminal configuration OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntroductionSeveral differen

Strany 318 - MSDL/AML states

Terminal configuration A-3Configuring an HP700/32 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Configuring

Strany 319 - ESDA error messages

A-4 Terminal configuration Configuring an HP700/32 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999HP700/32 set

Strany 320 - CSA error messages

Terminal configuration A-5Configuring an HP700/32 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999HP700/32 se

Strany 321 - ENL AML n AUTO

A-6 Terminal configuration Configuring an HP700/32 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999HP700/32 set

Strany 322

Terminal configuration A-7Configuring a VT420 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Configuring a V

Strany 323

Unpacking and inspecting the equipment 4-5Removing and reinstalling printed circuit packsStandard 1.0 Modular Option EC Installation and Maintenance

Strany 324 - STAT ESDI

A-8 Terminal configuration Configuring a VT420 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999VT420 setup scre

Strany 325 - Option EC and the Meridian 1

Terminal configuration A-9Configuring a VT520 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Configuring a V

Strany 326

A-10 Terminal configuration Configuring a VT520 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19994 When the setu

Strany 327 - Voice card/channel problems

Terminal configuration A-11Configuring a VT520 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999VT520 setup va

Strany 328 - Channel status

A-12 Terminal configuration Configuring a VT520 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Display Lines p

Strany 329 - Channel status Idle

Terminal configuration A-13Configuring a VT520 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Keyboard VT ke

Strany 330 - Silent channels

A-14 Terminal configuration Configuring a VT520 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Communication P

Strany 331 - Silent channel—calls

Terminal configuration A-15Configuring a VT520 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Port selection

Strany 332 - Administration problems

A-16 Terminal configuration Configuring an NT220 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Configuring an

Strany 333

Terminal configuration A-17Configuring an NT220 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999NT220 setup s

Strany 335 - User-reported problems

4-6 Unpacking and inspecting the equipment Removing and reinstalling printed circuit packsStandard 1.0 Modular Option EC Installation and Maintenance

Strany 336 - Call Sender does not

A-18 Terminal configuration Configuring an NT220 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999NT220 setup sc

Strany 337 - Revert DN does not

Terminal configuration A-19Configuring an HP700/22 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Configurin

Strany 338

A-20 Terminal configuration Configuring an HP700/22 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999HP700/22 se

Strany 339 - Hardware maintenance

Terminal configuration A-21Configuring an HP700/22 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999HP700/22 s

Strany 340

A-22 Terminal configuration Configuring a VT320 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Configuring a V

Strany 341 - Power supply replacement

Terminal configuration A-23Configuring a VT320 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999VT320 setup sc

Strany 342 - 18-4 Hardware maintenance

A-24 Terminal configuration Configuring a VT220 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Configuring a V

Strany 343 - Printed circuit packs (PCPs)

Terminal configuration A-25Configuring a VT220 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999VT220 setup sc

Strany 344 - 18-6 Hardware maintenance

A-26 Terminal configuration Configuring a VT220 terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 345 - Hardware maintenance 18-7

Appendix BModem configurationsIn this appendixOverview B-2Supported modems B-3Connecting the modem to the administration terminal B-5U.S. Robotics mod

Strany 346 - 18-8 Hardware maintenance

Chapter 5Installing a column or moduleIn this chapter Overview 5-2Installing columns and modules 5-3

Strany 347 - Hardware maintenance 18-9

B-2 Modem configurations OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntroductionEach modem supplie

Strany 348 - 18-10 Hardware maintenance

Modem configurations B-3Supported modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Supported modemsIntroductionT

Strany 349 - Hardware maintenance 18-11

B-4 Modem configurations Supported modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999• Ven-Tel modems This sectio

Strany 350 - 18-12 Hardware maintenance

Modem configurations B-5Connecting the modem to the administration terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide Novembe

Strany 351 - Hardware maintenance 18-13

B-6 Modem configurations Connecting the modem to the administration terminalStandard 1.0 Modular Option EC Installation and Maintenance Guide November

Strany 352 - 18-14 Hardware maintenance

Modem configurations B-7U.S. Robotics modemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999U.S. Robotics modemIntrodu

Strany 353

B-8 Modem configurations U.S. Robotics modemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Configuring the U.S. Roboti

Strany 354 - Replacing a card

Modem configurations B-9U.S. Robotics modemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19994 Enter these commands fro

Strany 355

B-10 Modem configurations Racal modemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Racal modemIntroductionTo configur

Strany 356 - Disk unit replacement

Modem configurations B-11Racal modemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Configuring the Racal ALM3223 mod

Strany 357 - Replacing a disk in an

5-2 Installing a column or module OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntroductionThe proce

Strany 358

B-12 Modem configurations Hayes modemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Hayes modem IntroductionTo configu

Strany 359

Modem configurations B-13Hayes modemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Configuring the Hayes Optima 144

Strany 360 - Replacing the primary

B-14 Modem configurations UDS modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999UDS modemsIntroductionThe following

Strany 361 - Replacing the

Modem configurations B-15UDS modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999• “Configuring the UDS 2440 modem

Strany 362

B-16 Modem configurations UDS modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Configuring the UDS 2440 modem as a

Strany 363 - Upgrade unshadowed

Modem configurations B-17UDS modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999PROTOCOL? NOIf this configuration

Strany 364 - 18-26 Hardware maintenance

B-18 Modem configurations UDS modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Configuring the UDS 2440 modem as a

Strany 365 - Enabling or disabling

Modem configurations B-19UDS modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19992 Respond to the appropriate promp

Strany 366 - View Disk

B-20 Modem configurations UDS modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Configuring the UDS 2440 modem as a

Strany 367 - Tape drive replacement

Modem configurations B-21UDS modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999UDS 224 A/D modemRefer to one of t

Strany 368 - 18-30 Hardware maintenance

Installing a column or module 5-3Installing columns and modulesStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Instal

Strany 369 - Hardware maintenance 18-31

B-22 Modem configurations UDS modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999UDS EC 224 A/D modem hardware confi

Strany 370 - Tape drive maintenance

Modem configurations B-23UDS modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Configuring the UDS 224 A/D as a 9

Strany 371 - Cleaning the Archive

B-24 Modem configurations UDS modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999UDS EC 224 A/D modem hardware confi

Strany 372

Modem configurations B-25Ven-Tel modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Ven-Tel modemsIntroductionThe

Strany 373 - Archive tape drive cleaning

B-26 Modem configurations Ven-Tel modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Setting the switches on theVen-

Strany 374 - Cleaning the Tandberg

Modem configurations B-27Ven-Tel modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Settings for SW2 for the Ven-T

Strany 375

B-28 Modem configurations Ven-Tel modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Settings for SW6 for the Ven-Te

Strany 376 - 18-38 Hardware maintenance

Modem configurations B-29Ven-Tel modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Ven-Tel 2400-33/2400 Plus II m

Strany 377 - Chapter 19

B-30 Modem configurations Ven-Tel modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Ven-Tel 9600 Plus/9600 Plus II

Strany 378

Modem configurations B-31Ven-Tel modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Configuring theVen-Tel 2400-33

Strany 379 - Disk drive sanity test

5-4 Installing a column or module Installing columns and modulesStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Note 1:

Strany 380 - Communication

B-32 Modem configurations Ven-Tel modemsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Configuring theVen-Tel 9600 Plu

Strany 381

Appendix CEnhanced MMP40 (or MMP40) troubleshooting flowchartsIn this appendixOverview C-2 Flowcharts C-3

Strany 382 - Risk of data loss

C-2 Enhanced MMP40 (or MMP40) troubleshooting flowcharts OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Overvi

Strany 383 - Appendix A

Enhanced MMP40 (or MMP40) troubleshooting flowcharts C-3FlowchartsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Flo

Strany 384

C-4 Enhanced MMP40 (or MMP40) troubleshooting flowcharts Flowcharts (continued)Standard 1.0 Modular Option EC Installation and Maintenance Guide Novem

Strany 385 - HP700/32 terminal

Enhanced MMP40 (or MMP40) troubleshooting flowcharts C-5Flowcharts (continued)Standard 1.0 Modular Option EC Installation and Maintenance Guide Nove

Strany 386 - HP700/32 setup screens

C-6 Enhanced MMP40 (or MMP40) troubleshooting flowcharts Flowcharts (continued)Standard 1.0 Modular Option EC Installation and Maintenance Guide Novem

Strany 387 - Terminal configuration A-5

Enhanced MMP40 (or MMP40) troubleshooting flowcharts C-7Flowcharts (continued)Standard 1.0 Modular Option EC Installation and Maintenance Guide Nove

Strany 388 - A-6 Terminal configuration

C-8 Enhanced MMP40 (or MMP40) troubleshooting flowcharts Flowcharts (continued)Standard 1.0 Modular Option EC Installation and Maintenance Guide Novem

Strany 389 - Configuring a VT420 terminal

Enhanced MMP40 (or MMP40) troubleshooting flowcharts C-9Flowcharts (continued)Standard 1.0 Modular Option EC Installation and Maintenance Guide Nove

Strany 390 - VT420 setup screens

Installing a column or module 5-5Installing columns and modulesStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999• In a

Strany 391 - Configuring a VT520 terminal

C-10 Enhanced MMP40 (or MMP40) troubleshooting flowcharts Flowcharts (continued)Standard 1.0 Modular Option EC Installation and Maintenance Guide Nove

Strany 392

Enhanced MMP40 (or MMP40) troubleshooting flowcharts C-11Flowcharts (continued)Standard 1.0 Modular Option EC Installation and Maintenance Guide Nov

Strany 393 - VT520 setup values

C-12 Enhanced MMP40 (or MMP40) troubleshooting flowcharts Flowcharts (continued)Standard 1.0 Modular Option EC Installation and Maintenance Guide Nove

Strany 394

Enhanced MMP40 (or MMP40) troubleshooting flowcharts C-13Flowcharts (continued)Standard 1.0 Modular Option EC Installation and Maintenance Guide Nov

Strany 395

C-14 Enhanced MMP40 (or MMP40) troubleshooting flowcharts Flowcharts (continued)Standard 1.0 Modular Option EC Installation and Maintenance Guide Nove

Strany 396

Appendix DCSQI, CSQO, and call register settingsIn this appendixCall registers D-2Set the number of call registers D-3CSQI/CSQO D-5

Strany 397 - Port selection for VT520

D-2 CSQI, CSQO, and call register settings Call registersStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Call registers

Strany 398 - Configuring an NT220 terminal

CSQI, CSQO, and call register settings D-3Set the number of call registersStandard 1.0 Modular Option EC Installation and Maintenance Guide November

Strany 399 - NT220 setup screens

D-4 CSQI, CSQO, and call register settings Set the number of call registersStandard 1.0 Modular Option EC Installation and Maintenance Guide November

Strany 400 - A-18 Terminal configuration

CSQI, CSQO, and call register settings D-5CSQI/CSQOStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999CSQI/CSQOIntroduct

Strany 401 - HP700/22 terminal

5-6 Installing a column or module Installing columns and modulesStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 402 - HP700/22 setup screens

D-6 CSQI, CSQO, and call register settings CSQI/CSQOStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Notes: 1. If there

Strany 403 - T T T T T T

Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999IndexNumerics68K card, card slot locations, 8-13, 8-14AA/B switchbox i

Strany 404 - Configuring a VT320 terminal

Index-2Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999shadowed system, 7-8unshadowed system, 7-4overview, 7-2, 7-26doc

Strany 405 - VT320 setup screens

Index-3Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Meridian Mailassembly, 3-1installation, column or module, 5-1in

Strany 406 - Configuring a VT220 terminal

Index-4Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999SSEERs, 16-33, 16-34, 16-35shadowed systemconfiguration, backpla

Strany 407 - VT220 setup screens

Reader Response FormMeridian Mail Modular Option EC 13Installation and Maintenance Guide555-7061-250Tell us about yourself:Name:

Strany 408 - A-26 Terminal configuration

Reader Response FormReader Response Form

Strany 410

Meridian Mail Modular Option ECInstallation and Maintenance GuideToronto Information ProductsNortel Networks522 University Avenue, 14th FloorToronto,

Strany 411

Chapter 6Installing power suppliesIn this chapter Overview 6-2Common equipment power supply installation 6-3AC system 6-4DC system 6-6

Strany 412 - B-4 Modem configurations

6-2 Installing power supplies OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntroductionThis chapter

Strany 413 - Connecting the

Installing power supplies 6-3Common equipment power supply installationStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19

Strany 414

iiiStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Publication historyNovember 1999Modular Option EC Installati

Strany 415 - U.S. Robotics modem

6-4 Installing power supplies AC systemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999AC systemInstalling the CEPS for

Strany 416

Installing power supplies 6-5AC systemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19995 Briefly turn on the power at

Strany 417

6-6 Installing power supplies DC systemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999DC systemInstalling the DCEPS fo

Strany 418 - Racal modem

Installing power supplies 6-7DC systemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19995 Briefly turn on the switches

Strany 419 - ALM3223 modem as a

6-8 Installing power supplies DC systemStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 420 - Hayes modem

Chapter 7Installing the disk drives and tape driveIn this chapter Overview 7-2Disk drives in an unshadowed system 7-4Disk installation (unshadowed sys

Strany 421 - Optima 144 modem as

7-2 Installing the disk drives and tape drive OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999OverviewIntroduct

Strany 422 - UDS modems

Installing the disk drives and tape drive 7-3OverviewStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Modular Option E

Strany 423 - 2400 bps modem

7-4 Installing the disk drives and tape drive Disk drives in an unshadowed systemStandard 1.0 Modular Option EC Installation and Maintenance Guide Nov

Strany 424

Installing the disk drives and tape drive 7-5Disk installation (unshadowed systems)Standard 1.0 Modular Option EC Installation and Maintenance Guide

Strany 425

iv Publication historyStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 426 - 9600 bps modem

7-6 Installing the disk drives and tape drive Disk installation (unshadowed systems)Standard 1.0 Modular Option EC Installation and Maintenance Guide

Strany 427

Installing the disk drives and tape drive 7-7Disk installation (unshadowed systems)Standard 1.0 Modular Option EC Installation and Maintenance Guide

Strany 428

7-8 Installing the disk drives and tape drive Disk drives in a shadowed systemStandard 1.0 Modular Option EC Installation and Maintenance Guide Novemb

Strany 429 - 224 A/D as a local

Installing the disk drives and tape drive 7-9Disk drives in a shadowed systemStandard 1.0 Modular Option EC Installation and Maintenance Guide Novem

Strany 430

7-10 Installing the disk drives and tape drive Disk installation (shadowed systems)Standard 1.0 Modular Option EC Installation and Maintenance Guide N

Strany 431

Installing the disk drives and tape drive 7-11Disk installation (shadowed systems)Standard 1.0 Modular Option EC Installation and Maintenance Guide

Strany 432

7-12 Installing the disk drives and tape drive Disk installation (shadowed systems)Standard 1.0 Modular Option EC Installation and Maintenance Guide N

Strany 433 - Ven-Tel modems

Installing the disk drives and tape drive 7-13Disk drive diagramsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Disk

Strany 434 - 9600 Plus II modem

7-14 Installing the disk drives and tape drive Disk drive diagramsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999300 M

Strany 435 - Plus II modem

Installing the disk drives and tape drive 7-15Disk drive diagramsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999300

Strany 436 - Plus II as a local 9600

ContentsAbout this guide xiii1Introduction to Meridian Mail Modular Option EC 1-1Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Strany 437

7-16 Installing the disk drives and tape drive Disk drive diagramsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999300 M

Strany 438

Installing the disk drives and tape drive 7-17Disk drive diagramsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999300

Strany 439 - Plus II as a remote

7-18 Installing the disk drives and tape drive Disk drive diagramsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19991.0 G

Strany 440 - 9600 Plus II as a

Installing the disk drives and tape drive 7-19Disk drive diagramsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19991.0

Strany 441 - Appendix C

7-20 Installing the disk drives and tape drive Disk drive diagramsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19991.0 G

Strany 442

Installing the disk drives and tape drive 7-21Disk drive diagramsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19991.0

Strany 443 - Flowcharts

7-22 Installing the disk drives and tape drive Disk drive diagramsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19991.2 G

Strany 444 - Flowcharts (continued)

Installing the disk drives and tape drive 7-23Disk drive diagramsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19992.1

Strany 445

7-24 Installing the disk drives and tape drive Disk drive diagramsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19994.0 G

Strany 446

Installing the disk drives and tape drive 7-25Disk drive diagramsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 447

vi ContentsStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19996 Installing power supplies 6-1Overview . . . . . . . . . .

Strany 448

7-26 Installing the disk drives and tape drive Overview of tape drivesStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999O

Strany 449

Installing the disk drives and tape drive 7-27Tandberg tape driveStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Tand

Strany 450

7-28 Installing the disk drives and tape drive Archive tape driveStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Archiv

Strany 451

Installing the disk drives and tape drive 7-29Archive tape driveStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Both

Strany 452

7-30 Installing the disk drives and tape drive Tape drive locationStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999Tape

Strany 453

Installing the disk drives and tape drive 7-31Tape drive installationStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 454 - AA—LED stuck at “.4”

7-32 Installing the disk drives and tape drive Tape drive installationStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999I

Strany 455 - Appendix D

Installing the disk drives and tape drive 7-33Tape drive installationStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Strany 456 - Call registers

7-34 Installing the disk drives and tape drive Tape drive installationStandard 1.0 Modular Option EC Installation and Maintenance Guide November 1999T

Strany 457 - Assumptions

Chapter 8Configuring the backplane and inspecting the printed circuit packsIn this chapter Overview of configuring the backplane 8-2Backplane switch s

Strany 458 - Default call registers

Contents viiStandard 1.0 Modular Option EC Installation and Maintenance Guide November 19999 Installing intramodule and intermodule cabling 9-1Overvie

Strany 459 - CSQI/CSQO

8-2 Configuring the backplane and inspecting the printed circuit packs Overview of configuring the backplaneStandard 1.0 Modular Option EC Installatio

Strany 460

Configuring the backplane and inspecting the printed circuit packs 8-3Backplane switch settingsStandard 1.0 Modular Option EC Installation and Mainte

Strany 461 - Numerics

8-4 Configuring the backplane and inspecting the printed circuit packs Backplane switch settingsStandard 1.0 Modular Option EC Installation and Mainte

Strany 462

Configuring the backplane and inspecting the printed circuit packs 8-5Setting the backplane switches in an unshadowed systemStandard 1.0 Modular Opti

Strany 463

8-6 Configuring the backplane and inspecting the printed circuit packs Setting the backplane switches in a shadowed systemStandard 1.0 Modular Option

Strany 464

Configuring the backplane and inspecting the printed circuit packs 8-7Setting the backplane switches in a shadowed systemStandard 1.0 Modular Option

Strany 465 - Reader Response Form

8-8 Configuring the backplane and inspecting the printed circuit packs Shroud terminators and jumpersStandard 1.0 Modular Option EC Installation and M

Strany 466

Configuring the backplane and inspecting the printed circuit packs 8-9Shroud terminators and jumpersStandard 1.0 Modular Option EC Installation and M

Strany 467

8-10 Configuring the backplane and inspecting the printed circuit packs Printed circuit packs (PCPs)Standard 1.0 Modular Option EC Installation and Ma

Strany 468

Configuring the backplane and inspecting the printed circuit packs 8-11Removing, checking, and installing PCPsStandard 1.0 Modular Option EC Installa

Komentáře k této Příručce

Žádné komentáře