
Starting up and configuring Meridian Mail 13-13
Configuring Meridian Mail on the EC 11
Standard 1.0 Option 11 EC Installation and Maintenance Guide November 1999
Entering DSP
parameters
To review or change the DSP parameters on your system,
follow these steps.
Step Action
1 From the previous procedure, press <Return>.
Result: The following DSP parameters screen is displayed.
Note: Do not change DSP parameters unless you are
instructed to by Nortel.
2 Press the up or down arrow keys to select Done.
3 Go to “Defining voice port hardware locations” on page 13-14.
Komentáře k této Příručce