Seagate ST9100A Uživatelský manuál stáhnout pdf (Strana 46)

filtering, the given filter options will be applied on the

results of previous filtering process.

 Kill button has been added during uploading and

extraction process. When you check “The cancel

button kills uploading/extracting sample file” in

software settings dialog, then when you press

“Cancel” button during uploading trace file, it is applied

immediately after pressing it.

 All SATA compliance tests have been updated

according to UTD version 1.2.

 Emulator multiplexing feature has been added on

STX460 with below stipulations:

 Both host emulator and device emulator support

Muxing.

 STX460 can have 2 narrow ports emulator with no

muxing -OR- a 1 port emulator with muxing

 When you use muxing in emulator (host or device),

there is no analyzer support on ports 1 and 2.

 Multi port emulator support has been added on the

STX460.

 Both host emulator and device emulator support multi

port.

 When you use Multiport in emulator (host or device)

on STX460, there is no analyzer on ports 1 and 2

 Each SXT460 is limited to 2 emulators running

simultaneously.

 Emulators ports both have to be either “Host Initiator”

OR “Target” only.

 The Memory of each Emulator port is increased to 511

MB. It means you can write exerciser script up to 511

MB. Please note when you use single port Initiator

emulator/Analyzer project, the sampling memory size

is limited to one memory module on STX460 board

and the emulator memory will still be 511 MB.

5.41.

Version 2.64

 Support for STPHY3 Rev C

 Fixed application crash in target emulator during error

injection by command number.

 Multiplexing has been added to SAS software.

 Auto speed detection has been added to SAS for

analyzer and emulators on STX460.

 SATA compliance test support has been added to

STX460.

 Two options have been added for the spread sheet

view software settings as below:

 Repeat decoded command in frame column

 Decode CDB of command (if you don’t check it, we

show the raw data of CDB instead of decoding it)

 In the spreadsheet view, we added a data icon (shown

as D) on Read/Write commands for showing

transferred data by command.

1 2 ... 41 42 43 44 45 46 47 48 49

Komentáře k této Příručce

Žádné komentáře

Seagate ST9100A Uživatelský manuál Strana 46

Komentáře k této Příručce

Související produkty a manuály pro ne Seagate ST9100A