Seagate ST318404LC Uživatelská příručka stáhnout pdf (Strana 13)

Dell Compellent Confidential HP-UX Best Practices 11i v2 and 11i v1

Page|13



presented from the Dell Compellent Storage Center to the host, as shown in

RED below.

Class I H/W Path Driver S/W State H/W Type Description

===============================================================================

disk 4 0/0/2/0.6.0 sdisk CLAIMED DEVICE SEAGATE ST318404LC

/dev/dsk/c1t6d0 /dev/rdsk/c1t6d0

<snip>

disk 6 1/4/0/0.206.2.255.0.0.0 sdisk CLAIMED DEVICE COMPELNTCompellent Vol

/dev/dsk/c27t0d0 /dev/rdsk/c27t0d0

disk 28 1/4/0/0.206.3.255.0.0.0 sdisk CLAIMED DEVICE COMPELNTCompellent Vol

/dev/dsk/c28t0d0 /dev/rdsk/c28t0d0

disk 29 1/4/0/0.206.4.255.0.0.0 sdisk CLAIMED DEVICE COMPELNTCompellent Vol

/dev/dsk/c29t0d0 /dev/rdsk/c29t0d0

disk 30 1/4/0/0.206.5.255.0.0.0 sdisk CLAIMED DEVICE COMPELNTCompellent Vol

/dev/dsk/c30t0d0 /dev/rdsk/c30t0d0

If no new devices are discovered or shown, then run the command “insf –e” to force a scan

and rebuild of the system device files/device tree; thereafter repeating the ioscan

command from above.

insf: Installing special files for sctl instance 2 address 0/0/1/0.7.0

insf: Installing special files for sdisk instance 4 address 0/0/2/0.6.0

<snip>

insf: Installing special files for sdisk instance 7 address 1/4/0/0.206.2.255.0.0.1

insf: Installing special files for sdisk instance 8 address 1/4/0/0.206.2.255.0.0.2

insf: Installing special files for pseudo driver diag2

insf: Installing special files for pseudo driver root

To validate that the new device (as discovered) is presented from the Dell Compellent Storage Center,

issue the following command.

Type: /usr/sbin/diskinfo /dev/rdsk/c27t0d0

SCSI describe of /dev/rdsk/c27t0d0:

vendor: COMPELNT

product id: Compellent Vol

type: direct access

size: 31457280 Kbytes

bytes per sector: 512

To confirm that this is the actual LUN, matched by its unique serial number, (where you

Seagate ST318404LC Uživatelská příručka Strana 13