Seagate ST3300007LW Uživatelská příručka stáhnout pdf (Strana 11)

Overview

One of the design strengths of SCSI Hammer™ is

the ability for the device to erase multiple hard

drives simultaneously – as many as thirty (30) at

one time.

SCSI Hammer™ offers an erase method that

conforms to the data ‘purge’ guidelines specified

in NIST 800-88.

The SCSI Hammer™ "Secure Erase" calls upon

the firmware of the drive(s) to execute and

monitor the erase procedure. Once this process

is initiated on a drive, the user data storage area

becomes and remains unavailable until a

successful "Secure Erase" is completed. This

method meets the NIST 800-88 ‘purge’ criteria.

Before using SCSI Hammer™, take a moment to

familiarize yourself with the device itself. Notice

that SCSI Hammer™ is labeled with ‘SCSI-A’ on

the left, and ‘SCSI-B’ on the right.

SCSI Hammer™ is controlled by five buttons,

shown in Figure 1. The red power button is used

to power the unit on or off. Upon turning the

unit on, the LCD screen will display ‘CPR Tools –

SCSI Hammer’ and the version number. SCSI

Hammer™ will then display ‘Scanning for Drives’

as it probes for attached devices.

SCSI Hammer™ provides one 50 pin and one 68

pin SCSI connector on each ‘Side’ of the device.

Figure 2 and Figure 3 offer an annotated, close-

up view of ‘Side A’ and ‘Side B’ of SCSI

Hammer™.

Figure 1 - Front Panel, Hammer™

Figure 2 - Hammer™ A SIDE

Figure 3 - Hammer™ B SIDE

SCSI Hammer Notes:

To power off SCSI Hammer,

press the red power button and

hold it for approximately one (1)

second until the LCD backlight is

no longer illuminated.

SCSI Hammer™ Users Guide

Page 11 of 89

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 88 89

Žádné komentáře

Seagate ST3300007LW Uživatelská příručka Strana 11