Seagate ST32430N Specifikace stáhnout pdf (Strana 40)

Hardware Description of Coprocessor – WSI2 Board Description

38 Application ModuleX Service 12/01

Honeywell

WSI2 Board

indicators (LEDs)

and switch

The diagram below shows two indicators and a switch at the left. These

are the WSI2 board indicators. These indicators are directly visible with

the chassis front cover in place. The indicators are described as follows:

• Transaction error (red LED)

Indicates that a data parity error or bus error was encountered during

normal operation on the backplane module bus.

• WSCPU running (yellow LED)

When on indicates that the coprocessor software (HP-UX) is up and

running.

• Shutdown Switch

The switch can be used to force a coprocessor (HP-UX) shutdown. It is

recommended that the keyboard method (as documented in the A

System Administration manual) be used whenever possible. Reference:

>>A

M System Administration manual (Section 3.5).

The positions of this switch are defined as follows:

To the left = Shutdown

To the right = Normal

• The remainder of the diagram shows the connectors and indicators

on the coprocessor daughter board free edge. They are defined in a

later diagram.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 153 154

Žádné komentáře

Seagate ST32430N Specifikace Strana 40