Seagate ST118273WC Uživatelská příručka stáhnout pdf (Strana 65)

Configuring a Tape Drive

HP-UX version 11.00.01 Configuring Tape Drives 5-3

3. Install the tape drive, following instructions provided in the hardware

documentation. See the HP-UX Operating System: Continuum Series 400

Hardware Installation Guide (R002H) or the HP-UX Operating System: Continuum

Series 400-CO Hardware Installation Guide (R021H) for instructions.

4. Turn on power to the tape drive.

5. Configure the device into the system. To do this, enter

addhardware

Executing this command does the following:

– updates the ioconfig file:

– writes the new configuration back to the boot location (flash card for

Continuum Series 400 systems and boot disk for Continuum Series 600

and 1200 systems)

– identifies the new tape drive to the HP-UX operating system

– associates it with its device driver

– creates the character and block device special (/dev) files required to

communicate with the tape drive

See the addhardware(1) man page for more information.

6. After waiting sufficient time for the drive to come online, verify that the tape

drive is configured into the system. To do this, enter the following commands:

ioscan -fn -C tape

ftsmaint ls hw_path

hw_path is the hardware path to the tape drive. Confirm that the tape drive is

present, CLAIMED, and Online, and that device special files have been created

for it in the /dev/dsk and /dev/rdsk directories. (There is substantial

overlap between the ftsmaint and ioscan commands, but the ftsmaint

command does not include the device file names and the ioscan command

does not include the Status information.)

In the following sample output, the tape driver at hardware path 14/0/3.4.0

can be accessed by one of eight device files.

# ioscan -fn -C tape

Class I H/W Path Driver S/W State H/W Type Description

==================================================================

tape 0 14/0/3.4.0 stape CLAIMED DEVICE HP35480A

/dev/rmt/0m /dev/rmt/c0t3d0BESTn

/dev/rmt/0mb /dev/rmt/c0t3d0BEST

/dev/rmt/0mn /dev/rmt/c0t3d0BESTb

/dev/rmt/0mnb /dev/rmt/c0t3d0BESTnb

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 85 86

Žádné komentáře

Seagate ST118273WC Uživatelská příručka Strana 65